2020 Brillion Agricultural Seeders

Overview
Overview
The concept behind the Brillion Sure Stand Agricultural Seeders has not changed since 1948: precise metering of a given seed variety and consistent depth of seed placement.


The Sure Stand Concept

The Brillion Sure Stand Concept has survived the test of time and the challenges from many competitors and many different seeding methods. However, the simplicity of the Sure Stand Concept is still the best way to seed legumes and grasses efficiently. The larger front notched roller firms the seedbed and put shallow indentations into the soil surface. The seed is metered from the seedboxes to free fall onto the deflectors. The deflectors spread the seed across the full width of the seeder for a broadcast style of seeding. The smaller rear roller, with its notches splitting the middle of the front indentations, squeezes the soil around the seed for the ultimate in seed to soil contact and consistent seed placement. That’s the Sure Stand Concept.
 

Models Available

NEW! 16′ Agricultural Seeder (SS-16 & SSP-16)

New to the seeder line-up is the 16’ Agricultural Seeder, which takes the popular Sure Stand Seeder concept to the next level. The 16’ seeding width and 20-bushel capacity seedbox allow the operator to spend more time seeding and less time stopping to fill the seedboxes, maximizing efficiency.

The seeder is equipped with the proven Micro-Meter seed metering system and can seed a variety of seeds at the correct depth to ensure optimal germination. The 16’ Seeder features pneumatic down pressure on the rear roller for better seed coverage and squeezing out more air pockets in the seedbed. The heavy-duty frame to support the larger seedboxes delivers more weight per foot on the rollers. Any soil clods are easily crushed, further fine-tuning the seedbed for excellent germination rates.

The 16’ seeder is available in a pull-type or three-point hitch configuration. Optional equipment includes an S-Tine Track Remover or Coil Tine Track Remover, an Electronic Acre Meter Kit, and an Electric Clutch Kit that includes a seed shaft sensor and monitor.

Three-Point Hitch Models (SSP Series)

The SSP Series is available in 4’, 5’ and 6’ sizes. Equipped with a meter and agitator box as standard equipment, these three-point hitch models will do everything the larger machines can do, only on a much smaller scale. Coil tine wheel track removers and blade agitators in the rear seedbox are standard. The close-coupled hitch on these models allows use with compact tractors for excellent maneuverability in close quarters. These units may be small in size, but they are big on features.

Standard Series

The Standard Series of Sure Stand Seeders are the most popular and most versatile of the agricultural models. They are available in 8’, 10’ and 12’ sizes, in either Cat. II three-point hitch or pull-type models with hydraulic transport. They are available with both the legume box and brome box. Spring tine or coil tine track remover kits are available and highly recommended. An electronic acre meter is also offered as optional equipment.

Mid-Size Series

The Mid-Size Series is available in 8’, 10’ and 12’ sizes, in either Cat. II three-point hitch or pull-type models with hydraulic transport. These seeders employ the same bottom end for soil engagement and seed placement as all of the other Sure Stand models. However, the Mid-Size Series features a larger capacity legume box for better efficiency in the field. Spend less time filling and more time seeding… that’s the advantage of the Mid-Size Series. The seed meters on the Mid-Size Series are placed closer together for added seeding distribution. The brome box option is not available on the Mid-Size Series, but other options are the same as the other Sure Stand Seeders Models.

High Capacity Series

The High Capacity Series features the largest seeding capacity of all Brillion Sure Stand Agricultural Seeders. 8’, 10’, and 12’ sizes are available. Built with many of the same features as the Standard Series and the Mid-Size Series, these models offer even larger seed box capacities with narrow meter spacing to provide the ultimate in high-efficiency seeding. These seeders are available in Cat. II three-point hitch and pull-type models with hydraulic transport. The large boxes have seed level site windows, cover latches, and gas struts to hold the large covers in the open position for filling. The brome box is not available for this series, but other options are the same as the other Sure Stand Seeders.

Why Risk It?

Grass seed is a very expensive commodity. Because of Brillion’s precision placement of seeds, seeding rates can often be cut to nearly half of the rates previously used. In many cases, the savings in seed alone will pay for a Sure Stand Seeder in just a short time. Don’t risk your crop to another system. Don’t settle for less. Use the one seeding method you can count on time after time…a Brillion Sure Stand Seeder.

 Features

Pioneer In Sure Stand Seeding

  • Double Roller “Sure Stand” Concept Firms the Soil for Optimal Germination
  • Precision Seed Metering and Depth Placement
  • All Welded Structural Steel Frame Construction
  • Positive Ground Driven Seed Metering
  • Electronic Acre Meter Kits Available
  • Safety Warning Lights (Model Dependent)
  • Powder Coat Paint

Three-Point Hitch Models – 4′ to 6′

  • Three-Point Hitch – Cat. I, II Free Link
  • Three-Point Hitch – Cat. I Quick Coupler Hitch (Cat. II with Optional Adaptor Kit)
  • Micro-Metered Front Seed Box
  • Blade Agitator in Rear Seed Box
  • 11.5″ Gray Cast Iron Front Pulverizer Roller
  • 9.5″ Gray Cast Iron Rear Pulverizer Roller
  • Greaseable Axle Bearings
  • Coil Tine Wheel Track Remover Standard
  • Lift Sling Kits Available
  • Speed Up Kit (Doubles Output) Available
  • Brush Agitator for Rear Seed Box Available

Standard Series

  • 8′, 10′ and 12′ Three-Point Hitch and Pull-Type Models Available
  • Three-Point Hitch – Cat. II Free Link
  • Three-Point Hitch – Cat. II, IIIN Quick Coupler Hitch
  • 9.5L x 15-8 Ply Tires on Pull-Type Models
  • Micro-Metered Front Seed Box
  • Factory Installed Blade Agitator in Rear Seed Box (Cage Agitator is Shipped Uninstalled)
  • 15.75″ Gray Cast Iron Front Pulverizer Roller
  • 11.5″ Gray Cast Iron Rear Pulverizer Roller
  • Greaseable Axle Bearings
  • Brush Agitator Kit for Rear Seed Box Available
  • Divider Kit for Front Seed Box Standard (Separates Each Meter in Seed Box)
  • Speed Up Kit (Doubles Output) Available
  • S-Tine Wheel Track Remover Kit Available
  • Scraper Kit for Front Pulverizer Roller Available
  • Electric Clutch Kit Available
  • Seed Shaft Monitor Kit Available

Mid-Size Series

  • 8′, 10′ and 12′ Three-Point Hitch and Pull-Type Models Available
  • Larger Box Capacity and Narrower Meter Spacing than Standard Series Models
  • Three-Point Hitch – Cat. II Free Link
  • Three-Point Hitch – Cat. II, IIIN Quick Coupler Hitch
  • 9.5L x 15-8 Ply Tires on Pull-Type Models
  • Micro-Metered Seed Box
  • 15.75″ Gray Cast Iron Front Pulverizer Roller
  • 11.5″ Gray Cast Iron Rear Pulverizer Roller
  • Greaseable Axle Bearings
  • S-Tine Wheel Track Remover Kit Available
  • Coil Tine Track Remover
  • Scraper Kit for Front Pulverizer Roller Available
  • Electric Clutch Kit Available
  • Seed Shaft Monitor Kit Available

High Capacity Series

  • 8′, 10′ and 12′ Three-Point Hitch and Pull-Type Models Available
  • Largest Seed Box Capacity with Narrow Meter Spacing
  • Three-Point Hitch – Cat. II Free Link
  • Three-Point Hitch – Cat. II, IIIN Quick Coupler Hitch
  • 9.5L x 15-8 Ply Tires on 8′ Pull-Type Models
  • 11L x 15-12 Ply Tires on 10′ and 12′ Pull-Type Models
  • Micro-Metered Seed Box
  • Seed Box Sight Windows
  • Electric Clutch Kit Standard
  • 15.75″ Gray Cast Iron Front Pulverizer Roller
  • 11.5″ Gray Cast Iron Rear Pulverizer Roller
  • Greaseable Axle Bearings
  • S-Tine Wheel Track Remover Kit Available
  • Coil Tine Track Remover
  • Scraper Kit for Front Pulverizer Roller Available
  • Seed Shaft Monitor Kit Available

SS-16 Agricultural Seeder

Sure Stand Seeder…16 Feet in Every Pass

  • Seeding Width is 16’ – The Widest Non-Folding Seeder Offered by Brillion
  • Available in Pull-Type or Three-Point Hitch Configurations
  • Transport Width is 18’2”
  • Heavy-duty All Welded Structural Steel Frame Construction Provides More Weight per Foot on Rollers
  • Pulverizer Wheels are 15 ¾” Cast Iron on Front Roller and 11 ½” Cast Iron on Rear Roller
  • Pneumatic Down Pressure on Rear Roller
  • Positive Ground Driven Seed Metering
  • Micro-Meter Seed Box with Meters Spaced at 8”, Capacity of 20 Bushels
  • Cat. II, III Free Link or Cat. II, IIIN, III Quick Coupler Three-Point Hitch
  • Cat. II or III Pull-Type Hitch
  • (4) 11L x 15-12 Ply Transport Tires on Pull-Type Models
  • Optional S-Tine or Coil Tine Track Remover
  • Optional Electronic Acre Meter Kit
  • Optional Electric Clutch with Seed Shaft Sensor and Monitor
  • Scale Ready
  • LED Warning Lights and SMV Emblem
  • Powder Coat Paint

 

Specifications
Model
Agricultural Seeders
Year
2020
Sale Type
New
Manufacturer
Brillion
Quantity
0
Manufacturer Qty
0
Sales People
Contact Information

 Contact Information

Bob Mark New Holland - Lindsay

2197 Little Britain Road
Lindsay   Ontario , K9V 4S5

(705) 324-2221

Location
Model
Agricultural Seeders
Year
2020
Sale Type
New
Manufacturer
Brillion
Quantity
0
Manufacturer Qty
0

 Request More Info

  • Monday 8:00 AM - 5:00 PM
    Tuesday 8:00 AM - 5:00 PM
    Wednesday 8:00 AM - 5:00 PM
    Thursday 8:00 AM - 5:00 PM
    Friday 8:00 AM - 5:00 PM
    Saturday 8:00 AM - 12:00 PM
    Sunday Closed
  •  
My Cart - items